Fiber-coupled diode laser is a diode laser device that couples the generated light into an optical fiber. It is relatively easy to couple the output of the laser diode into an optical fiber to transmit the light where it is needed, so it can be used in many directions. In general, fiber-coupled semiconductor lasers have several advantages: the beam quality is smooth and uniform, defective fiber-coupled diode lasers can be easily replaced without changing the arrangement of the device using the light, fiber-coupled devices can be easily combined with other optical fiber components, and so on.

Lumispot offers this C3 Stage Fiber Coupled Diode Laserwith the above advantages plus efficient conduction and heat dissipation, good gas tightness, compactness, and long life, fully meeting industrial customers' requirements. The center wavelength is from 790 nm to 976 nm, and the spectral width is from 4 to 5 nm, all of which can be selected as needed. Compared with C2 series, C3 series fiber-coupled output semiconductor laser will have higher power, different models from 25W to 45W, configured with 0.22NA fiber.

C3 series products have an operating voltage of less than 6V, and the electro-optical conversion efficiency can basically reach more than 46%. In addition, Lumispot tech has the core technology to provide diversified customization services, you can provide the required fiber length, cladding diameter, output end type, wavelength, NA, power, etc.. This product is mainly used in illumination and laser pumping source. This product is recommended to use water cooling with temperature between 23 degree Celsius to 25 degree Celsius, the fiber can not be bent at a large angle, the bending diameter should be more than 300 times the diameter of the fiber.For more information, please refer to the product data sheet below and contact us with any additional questions.